Currently In Stock

Kailh Choc switches are low profile, ideal for builds that focus on achieving a low height and for keyboards you'd like to take with you on the go....

It's always a good idea to check if your microcontroller works before you assemble it, but sometimes they break after you've installed it. Desolder...

Tip: Click on the product pictures to have the options update automatically. The MBK keycaps turned out to be pretty popular! With scooped tops whi...

This revision isn't the most recent one. Go to the Kyria rev3 PCB Kit page to learn more. The Kyria is a 40% split keyboard. Its main features are ...

The renowned switch designer Gazzew has worked in tandem with Outemu to produce perhaps his best switch yet: the Boba U4. Tactile, yet silent, this...

SSD1306 OLED displays are one of the most common in mechanical keyboard kits. They're often used to display information about your keyboard, such a...

With the U4 switches being universally loved, some of you wondered: what if the silent tactile switch wasn't silent? The U4 Thocky is the result: w...

If your keyboard supports RGB underglow, chances are that these are the LEDs that make it possible. Quite bright and individually addressable, thes...

This case is not fully case-compatible with revision 3 of the Kyria. The puck position has moved, and 2u keycaps are not supported anymore. A case ...

A TRRS cable is needed to connect most split keyboards to each other. This braided cable does the job while looking good doing it! These cables hav...

Now available in various colours: MBK keycaps! With scooped tops which hugs your fingertips, high corners to easily find keys, and a flat profile t...

An original EC11 encoder by ALPS. Designed to deal with harsh environments, it requires more force to operate giving it very tactile feedback. You'...

Gazzew is proud to present another switch in his lineup: the Pink Silent Linear switch, also known as the Bobagum! With the same superior plastic, ...

Some keyboards don't support hot swap by default. Thankfully, there's something you can do about that: install Mill-Max hot swap sockets! After you...

To connect both halves of a split keyboard together, a TRRS cable is often used, which connects to a TRRS jack on each half. Whether you're looking...

Some people prefer to use their keyboard laid flat on a table, others prefer to use it at an angle. While there are some do-it-yourself solutions o...

When using a wireless controller such as a nice!nano, you're looking for some additional hardware features. To save battery, it's useful to have a ...

Complete your Aurora Lily58 kit with a variety of case options. All options on this page are low profile, and consist of a set of top plates, a set...

While aluminium is relatively light, this knob made from solid metal has quite the heft to it. Originally meant as a knob for guitars, it turns out...

An original EC11 encoder by ALPS, featuring no detents, meaning that it's smooth in operation and you won't feel it "click" when you turn it. This ...

Please note: For kits sold at splitkb.com, if these sockets can be used, they'll be included in the kit itself. These sockets can only be used with...

Need to swap your keycaps for a different set? Or maybe you have a hotswap-capable keyboard and need to swap out your switches? You could do it by ...

Complete your Aurora Corne kit with a variety of case options. All options on this page are low profile, and consist of a set of top plates, a set ...

Designed by LowproKB and manufactured by Kailh, the Sunset switch sets a new standard for low profile tactile switches. The Sunset tactile switch u...

Give your keyboard a modern look with these transparent keycaps for Kailh Low Profile Choc switches. They allow you to see the switches underneath,...

Complete your Kyria rev3 kit with a variety of case options. All options on this page are low profile, and consist of a set of top plates, a set of...

Socketing your microcontroller is usually a good idea, as they're quite hard to remove, having many pins. OLED displays, having fewer pins, are eas...

Complete your Aurora Sweep kit with a variety of case options. All options on this page are low profile, and consist of a set of top plates, a set ...

When you use larger keys on your keyboard, they may start to wobble when you hit them off-center. Not anymore, with a Cherry PCB mount stabilizer! ...

A spinoff from the popular SK6812MINI (without the -E), these LEDs have little legs on the side to make them easier to solder. These LEDs provide R...

All kits sold at splitkb.com come with through-hole, axial diodes by default. They're easy to handle and easy to solder for beginners, but more sea...

Want to better use the space between the two halves of your keyboard, but is your TRRS cable in the way? With this set of adapters, you can change ...

Have a hotswappable keyboard and need something to pull the switches from your keyboard? With this handy tool, it's easy to get to the little latch...

Designed by MoErgo, with its innovative new MCC profile along with the use of textured POM material, these keycaps will feel smooth to the touch wh...

After months of testing, Gazzew is proud to present the Gazzew Boba LT! With the same superior plastic, mold, tight tolerances and Korean steel spr...

These are MX compatible plate mount switches, made by Kailh. Available in linear, tactile and clicky variants. These plate mount switches are compa...

The low-profile keycap you know and love, now available in smooth POM material! In partnership with Max, the original designer of the MBK profile, ...

With these tactile buttons, you'll be able to reset your keyboard without having to reach for tweezers or fiddling with a wire. They're available i...

There is a limit to this item of 10 per customer. If you need more, please mail us the items and quantities you'd like to order for a custom invoic...

Some say it's more comfortable to use something to rest your palms on. Made from flexible, black polyurethane, this wrist rest has just the right a...

You've used switches for a while now, and you've heard about people modding them. You can replace the springs to use different weights and characte...

There is a limit to this item of 10 per customer. If you need more, please mail us the items and quantities you'd like to order for a custom invoic...

The Aurora Lily58 is a redesign by splitkb.com of the popular lily58 keyboard by Naoki Katahira. The original project is open source. For every kit...

With the U4 switches being universally loved, some of you wondered: what if the silent tactile switch wasn't silent? The U4 Thocky is the result: w...

The Aurora Corne is a redesign by splitkb.com of the popular Corne keyboard (also known as the crkbd or the Helidox) by Foostan. The original proje...

The Aurora Sweep is a redesign by splitkb.com of the popular Sweep (Sweep Bling MX) by David Barr and contributors. The original project is open so...

Gazzew has worked in tandem with Outemu to produce perhaps his best switch yet: the Boba U4. Tactile, yet silent, this is an ideal switch for those...

All kits sold at splitkb.com come with through-hole, axial diodes by default. They're easy to handle and easy to solder for beginners, but if you'r...